ACHEMA special: Magnetic Coupled Centrifugal Pumps
Seal less solutions for the leakage free transport of liquids gain more and more importance in the pump industry.www.tacdesigninc.comintroduces the most important ACHEMA news about the competing technologies magnetic drive and canned motor pumps in two special reports.
Themagnetic driven sealless pump series MKPfromCP-Pumpsis extended up to a maximum capacity of 320 m³/h and 110 m. The construction features a product lubricated single bearing design. The shroud is available in Hast.C4 or ceramic. Solids up to 0,5 mm are no problem for this pump at a maximum content of 30%.
A key innovation ofITT Richteris theplain bearing cartridge of the new metallic magnetic drive pump ICMfor operating temperatures up to 280°C (535°F). There is probabley no other plain bearing system on the market, which is more reliable and, at the same time, easier to service.
In co-operation withVSX - Vogel Software, Richter demonstrates the data exchange according toVDMA Guideline 24278。The interface supports the communication between manufacturer and pump user. By using thepump selection software Spaix, pump users can tighten up the operational routines and achieve savings in time and costs in the planning and procurement phases. Pump manufacturers profit from the huge savings in the offering process.
Theworld's largest magnetic pumpis presented byKlaus Union。撷取的未签名盖章的离心泵SLM NVent magnetic drive reaches a maximum capacity of 2300 m³/h and a head of 65 m. The aggregate distinguishes itself due to a low dissipation and is driven by a 400 kW motor. The system used here has a wide variety of modules and security components which make a perfectly fitting solution according to the purpose possible. Among others, the usage lies in the chemical and petrochemical industry, e.g. when used to pump acids, alkali and hydrocarbon.
The PH series ofPan Worldconsists ofsealless magnetic driven pumps。The pumps are available withone or two stages.With a maximum discharge head of 70 m and a good chemical resistance they are suitable for higher lift head application such as PCB machines, filtration or etching machines.
Rütschi, specialist for canned motor pumps, now extends their product line by themagnetic coupled chemical standard pump CNMK.Preferred fields of application are the chemical industry, and the chemical engineering as well asnd such cases, where leakage-free operation is required because offor reasons of environmental protection leakage-free operation is required, but a canned motor pump is not wishedsuitable.
SGL Technicpresents theMAG-DIABON series。These chemical pumps combine the advantages of the magnetic drive with thegraphite material.The main advantage of graphite pumps resides in their great dimensional stability at high temperatures up to 200 °C. The pumps are perfectly adapted for the transfer of highly toxic or hazardous corrosive fluids.
Sulzer PumpsOHM is the new magnet coupled version within the theOH product family of process pumps.It was designed to meet or exceed the requirements of the latest 9th edition of API 610.
T.H.E. Pumpshave re-designed the electrical motor of theGP range.These base mounted magnetically coupled centrifugal pumps have been specifically developed for situations requiring low cost pumping of water and glycol solutions and are used extensively in remote chillers throughout the world.
Source:DECHEMA Ausstellungs-GmbH