Reliable and Cost-effective Sump Pumping with Sulzer’s Ejector

The alternatives were to use a cantilever pump, a submersible pump, a self-priming process pump or a process pump with an ejector.

The challenge

• Sulzer needed to find the optimal solution for sump pumping in terms of reliability, service friendliness, efficiency and investment costs to maximize the benefits for the customer.
• 客户希望使用一个标准的流程泵for sump pumping to enable the use of the same spare parts as for the process pumps in the other applications of the mill.

The solution
Sulzer concluded that its SNS process pump with an ejector was clearly the best alternative for this purpose – both energy efficient and cost competitive. The company was able to select from a variety of pump sizes and confirmed that the SNS1-80 pump was performing highly efficiently, and that the ejector did not consume energy during the normal pumping process. Pressurized air was available for the ejector in the mill.

The wastewater pit pump works intermittently, so priming is needed multiple times per day. The automation package controls the valves accurately and performs priming smoothly. No problems or failures have occurred. Priming with an ejector is efficient, reliable and fast.

"Sump pumping has never been as easy as with a standard process pump equipped with an ejector. Priming has never failed, and it is very fast"-Juha Ottelin, Area Sales Manager at Sulzer in Finland

Customer benefit

• The complete pump unit and the ejector, including the automation package, were easy and fast to install and commission.
• The ejector makes sump pumping easy, fast, reliable and cost effective.
• The investment cost is low.
• The solution is service friendly because the sump pump uses the same spare parts as the other process pumps in the mill.